Comfort close using remote
• active
• not active
Press and hold the lock button on the remote to close all windows and the sunroof. (codable in CAS)
Comfort close using keylocks
• active
• not active
Lock the car by key and hold the key in the lock position to close all windows and the sunroof. (codable in CAS)
Comfort close – door (comfort access)
• active
• not active
Use comfort closing features when locking with the door handle. This only works if comfort access is installed. Touch the locking area on the door handle for a longer time to close all windows and the sunroof. (codable in CAS)
Deactivate comfort access
• active
• not active
In order to deactivate the comfort access, set this coding to ‘not active’. This coding cannot be used to activate a retrofitted comfort access. When the comfort access is deactivated, neither closing nor opening the car via the door handle will work. Turning the ignition and engine on/off without putting the key into the ignition (also known as ‘Keyless Go’) will also not work anymore. Therefore the car cannot be stolen anymore by tricking the comfort access. In order to activate comfort access again, please set this coding to ‘active’. (codable in CAS)
Lock tailgate when car locked
• active
• not active
Tailgate cannot be unlocked, when car is locked. (codable in CAS)
Automatically lock vehicle duration
• 1 min
• 2 min
• 5 min
• 10 min
• 15 min
Duration in minutes until doors are locked after car was unlocked but no windows or doors have been opened. (codable in CAS)
Automatically lock vehicle Key 1
• active
• not active
Separate setting for ‘Automatically lock vehicle’ for key 1nIf no door or window has been opened two minutes after the car has been unlocked, the doors automatically lock. (codable in CAS)
Automatically lock vehicle Key 2
• active
• not active
Separate setting for ‘Automatically lock vehicle’ for key 2nIf no door or window has been opened two minutes after the car has been unlocked, the doors automatically lock. (codable in CAS)
Automatically lock vehicle Key 3
• active
• not active
Separate setting for ‘Automatically lock vehicle’ for key 3nIf no door or window has been opened two minutes after the car has been unlocked, the doors automatically lock. (codable in CAS)
Automatically lock vehicle Key 4
• active
• not active
Separate setting for ‘Automatically lock vehicle’ for key 4nIf no door or window has been opened two minutes after the car has been unlocked, the doors automatically lock. (codable in CAS)
Lock vehicle upon ignition
• active
• not active
Vehicle is locked, when ignition is turned on. (codable in CAS)
Threshold speed for vehicle locking
• 2 kph / 1 mph
• 6 kph / 4 mph
• 12 kph / 8 mph
• 18 kph / 11 mph
• 24 kph / 15 mph
• 30 kph / 19 mph
Sets the speed at which the vehicle automatically locks all doors.nTo activate this function you need to activate ‘Lock vehicle at x kph’ for the according keys. (codable in CAS)
Lock vehicle at x kph Key 1
• active
• not active
Automatically lock the vehicle at the set threshold speed when key 1 is used. (codable in CAS)
Lock vehicle at x kph Key 2
• active
• not active
Automatically lock the vehicle at the set threshold speed when key 2 is used. (codable in CAS)
Lock vehicle at x kph Key 3
• active
• not active
Automatically lock the vehicle at the set threshold speed when key 3 is used. (codable in CAS)
Lock vehicle at x kph Key 4
• active
• not active
Automatically lock the vehicle at the set threshold speed when key 4 is used. (codable in CAS)
Optical confirmation – locking vehicle
• active
• not active
Optical confirmation for locking vehicle is active/not active. (codable in LMA)
Optical confirmation lock vehicle Key 1
• active
• not active
Optical confirmation for locking vehicle is active/not active. Separate setting for ‘Optical confirmation for locking’ for key 1. (codable in LMA)
Optical confirmation lock vehicle Key 2
• active
• not active
Optical confirmation for locking vehicle is active/not active. Separate setting for ‘Optical confirmation for locking’ for key 2. (codable in LMA)
Optical confirmation lock vehicle Key 3
• active
• not active
Optical confirmation for locking vehicle is active/not active. Separate setting for ‘Optical confirmation for locking’ for key 3. (codable in LMA)
Audible confirmation – locking vehicle
• active
• not active
Audible confirmation for locking vehicle is active/not active. Only works if ‘Anti Theft System’ is set to ‘active’. (codable in DWA)
Optical confirmation – locking vehicle
• active
• not active
Optical confirmation for locking vehicle is active/not active. Only works if ‘Anti Theft System’ is set to ‘active’. (codable in DWA)
◆Opening（鍵・アンロック）
Comfort open using remote
• active
• not active
Press and hold the unlock button on the remote to open all windows and the sunroof. (codable in CAS)
Comfort open using keylocks
• active
• not active
Unlock the car by key and hold the key in the unlock position to open all windows and the sunroof. (codable in CAS)
Deactivate comfort access
• active
• not active
In order to deactivate the comfort access, set this coding to ‘not active’. This coding cannot be used to activate a retrofitted comfort access. When the comfort access is deactivated, neither closing nor opening the car via the door handle will work. Turning the ignition and engine on/off without putting the key into the ignition (also known as ‘Keyless Go’) will also not work anymore. Therefore the car cannot be stolen anymore by tricking the comfort access. In order to activate comfort access again, please set this coding to ‘active’. (codable in CAS)
Selective central locking
• active
• not active
Unlocking the car once only unlocks the driver’s door. Unlocking it again unlocks the other doors, too. (codable in CAS)
Selective central locking Key 1
• active
• not active
Separate setting for ‘Selective central locking’ for key 1nUnlocking the car once only unlocks the driver’s door. Unlocking it again unlocks the other doors, too. (codable in CAS)
Selective central locking Key 2
• active
• not active
Separate setting for ‘Selective central locking’ for key 2nUnlocking the car once only unlocks the driver’s door. Unlocking it again unlocks the other doors, too. (codable in CAS)
Selective central locking Key 3
• active
• not active
Separate setting for ‘Selective central locking’ for key 3nUnlocking the car once only unlocks the driver’s door. Unlocking it again unlocks the other doors, too. (codable in CAS)
Selective central locking Key 4
• active
• not active
Separate setting for ‘Selective central locking’ for key 4nUnlocking the car once only unlocks the driver’s door. Unlocking it again unlocks the other doors, too. (codable in CAS)
Selective central locking – unlock fuel lid
• active
• not active
The fuel lid is also unlocked upon the first unlock, when ‘Selective central locking’ is active. (codable in CAS)
Unlock car when turned off
• active
• not active
Doors are automatically unlocked, when ignition key is ejected. Only works if ‘Lock vehicle at x kph Key 1-4’ is activated. (codable in CAS)
Optical confirmation – unlocking vehicle
• active
• not active
Optical confirmation for unlocking vehicle is active/not active. (codable in LMA)
Optical confirmation unlock vehicle Key 1
• active
• not active
Optical confirmation for unlocking vehicle is active/not active. Separate setting for ‘Optical confirmation for unlocking’ for key 1. (codable in LMA)
Optical confirmation unlock vehicle Key 2
• active
• not active
Optical confirmation for unlocking vehicle is active/not active. Separate setting for ‘Optical confirmation for unlocking’ for key 2. (codable in LMA)
Optical confirmation unlock vehicle Key 3
• active
• not active
Optical confirmation for unlocking vehicle is active/not active. Separate setting for ‘Optical confirmation for unlocking’ for key 3. (codable in LMA)
Audible confirmation – unlocking vehicle
• active
• not active
Audible confirmation for unlocking vehicle is active/not active. Only works if ‘Anti Theft System’ is set to ‘active’. (codable in DWA)
Optical confirmation – unlocking vehicle
• active
• not active
Optical confirmation for unlocking vehicle is active/not active. Only works if ‘Anti Theft System’ is set to ‘active’. (codable in DWA)
◆ParkingLight（パーキングライト）
Comfort standing light
• active
• not active
If the light switch is set at automatic or on, the parking lights remain on, until the vehicle is locked with the remote. (codable in LMA)
◆PowerWindows（パワーウィンドウ）
Power windows after ignition off
• active
• not active
Power windows are active for another minute after ignition is turned off. (codable in CAS)
Power windows after ignition off
• 1 min
• 2 min
• 5 min
• 10 min
• 15 min
Duration in minutes, for which power windows are active after turning off the ignition. (codable in CAS)
◆Speedmeter（スピードメーター）
Digital speedometer
• active
• not active
The current speed is shown in the digital display below the speedometer. (codable in KOMBI)
Correction’ analog speedometer
• active
• not active
This coding does not work on US models. Per default the speed shown in the digital speedometer is ‘corrected’ by the car. This has the effect that the shown speed is a bit higher than the true speed of the car. (codable in KOMBI)
◆Tailgate/Rearlid（テールゲート・トランク）
Close trunk with footwell switch
• active
• not active
Close the trunk/rear lid with the interior footwell switch. (codable in HKL)
Close trunk with keyfob
• active
• not active
Close the trunk/rear lid via the keyfob. To activate this function also deactivate ‘Panic alarm with remote’ in the CAS module. If available, also activate ‘Close trunk with keyfob – addition’. (codable in HKL)
◆TurnSignals（ウィンカー）
Hazard lights
• standard
• double
Hazard lights blink once or twice. (codable in LMA)
Crash lights
• standard
• double
Hazard lights blink once or twice upon an accident. (codable in LMA)
One-touch turn signal function
• 1
• 3
• 5
Number of turn signals when tapping the turn signal. If available, please activate this option for the different keys as well. In some cases, this option also needs to be enabled in the iDrive. (codable in LMA)
One-touch turn signal function Key 1
• 1
• 3
• 5
Number of turn signals when tapping the turn signal. Separate setting for ‘One-touch turn signal function’ for key 1. (codable in LMA)
One-touch turn signal function Key 2
• 1
• 3
• 5
Number of turn signals when tapping the turn signal. Separate setting for ‘One-touch turn signal function’ for key 2. (codable in LMA)
One-touch turn signal function Key 3
• 1
• 3
• 5
Number of turn signals when tapping the turn signal. Separate setting for ‘One-touch turn signal function’ for key 3. (codable in LMA)
Optical confirmation – locking vehicle
• active
• not active
Optical confirmation for locking vehicle is active/not active. (codable in LMA)
Optical confirmation lock vehicle Key 1
• active
• not active
Optical confirmation for locking vehicle is active/not active. Separate setting for ‘Optical confirmation for locking’ for key 1. (codable in LMA)
Optical confirmation lock vehicle Key 2
• active
• not active
Optical confirmation for locking vehicle is active/not active. Separate setting for ‘Optical confirmation for locking’ for key 2. (codable in LMA)
Optical confirmation lock vehicle Key 3
• active
• not active
Optical confirmation for locking vehicle is active/not active. Separate setting for ‘Optical confirmation for locking’ for key 3. (codable in LMA)
Optical confirmation – unlocking vehicle
• active
• not active
Optical confirmation for unlocking vehicle is active/not active. (codable in LMA)
Optical confirmation unlock vehicle Key 1
• active
• not active
Optical confirmation for unlocking vehicle is active/not active. Separate setting for ‘Optical confirmation for unlocking’ for key 1. (codable in LMA)
Optical confirmation unlock vehicle Key 2
• active
• not active
Optical confirmation for unlocking vehicle is active/not active. Separate setting for ‘Optical confirmation for unlocking’ for key 2. (codable in LMA)
Optical confirmation unlock vehicle Key 3
• active
• not active
Optical confirmation for unlocking vehicle is active/not active. Separate setting for ‘Optical confirmation for unlocking’ for key 3. (codable in LMA)
Optical confirmation – locking vehicle
• active
• not active
Optical confirmation for locking vehicle is active/not active. Only works if ‘Anti Theft System’ is set to ‘active’. (codable in DWA)
Optical confirmation – unlocking vehicle
• active
• not active
Optical confirmation for unlocking vehicle is active/not active. Only works if ‘Anti Theft System’ is set to ‘active’. (codable in DWA)
◆VoltageMonitoring（電圧表示）
Angel Eyes voltage monit. 1/2
• active
• not active
Voltage monitoring for angel eyes. Might cause flickering of LED lights. (codable in LMA)
Angel Eyes voltage monit. 2/2
• active
• not active
Deactivate with ‘Angel Eyes voltage monit. 1/2’ to disable flickering of LED lights. (codable in LMA)
Sidemarker voltage monit. 1/2
• active
• not active
Voltage monitoring for sidemarkers. Might cause flickering of LED lights. (codable in LMA)
Sidemarker voltage monit. 2/2
• active
• not active
Deactivate with ‘Sidemarker voltage monit. 1/2’ to disable flickering of LED lights. (codable in LMA)
Turn signals front voltage monit. 1/2
• active
• not active
Voltage monitoring for turn signals front. Might cause flickering of LED lights. (codable in LMA)
Turn signals front voltage monit. 2/2
• active
• not active
Deactivate with ‘Turn signals front voltage monit. 1/2’ to disable flickering of LED lights. (codable in LMA)
Fog lights voltage monit. 1/2
• active
• not active
Voltage monitoring for fog lights. Might cause flickering of LED lights. (codable in LMA)
Fog lights voltage monit. 2/2
• active
• not active
Deactivate with ‘Fog lights voltage monit. 1/2’ to disable flickering of LED lights. (codable in LMA)
High beams voltage monit. 1/2
• active
• not active
Voltage monitoring for high beams. Might cause flickering of LED lights. (codable in LMA)
High beams voltage monit. 2/2
• active
• not active
Deactivate with ‘High beams voltage monit. 1/2’ to disable flickering of LED lights. (codable in LMA)
Low beams voltage monit. 1/2
• active
• not active
Voltage monitoring for low beams. Might cause flickering of LED lights. (codable in LMA)
Low beams voltage monit. 2/2
• active
• not active
Deactivate with ‘Low beams voltage monit. 1/2’ to disable flickering of LED lights. (codable in LMA)
Turn signals rear voltage monit. 1/2
• active
• not active
Voltage monitoring for turn signals rear. Might cause flickering of LED lights. (codable in LMA)
Turn signals rear voltage monit. 2/2
• active
• not active
Deactivate with ‘Turn signals rear voltage monit. 1/2’ to disable flickering of LED lights. (codable in LMA)
Braking lights voltage monit. 1/2
• active
• not active
Voltage monitoring for braking lights. Might cause flickering of LED lights. (codable in LMA)
Braking lights voltage monit. 2/2
• active
• not active
Deactivate with ‘Braking lights voltage monit. 1/2’ to disable flickering of LED lights. (codable in LMA)
Third brake light voltage monit. 1/2
• active
• not active
Voltage monitoring for third brake light. Might cause flickering of LED lights. (codable in LMA)
Third brake light voltage monit. 2/2
• active
• not active
Deactivate with ‘Third brake light voltage monit. 1/2’ to disable flickering of LED lights. (codable in LMA)
Tail lights voltage monit. 1/2
• active
• not active
Voltage monitoring for tail lights. Might cause flickering of LED lights. (codable in LMA)
Tail lights voltage monit. 2/2
• active
• not active
Deactivate with ‘Tail lights voltage monit. 1/2’ to disable flickering of LED lights. (codable in LMA)
Reversing lights voltage monit. 1/2
• active
• not active
Voltage monitoring for reversing lights. Might cause flickering of LED lights. (codable in LMA)
Reversing lights voltage monit. 2/2
• active
• not active
Deactivate with ‘Reversing lights voltage monit. 1/2’ to disable flickering of LED lights. (codable in LMA)
License plate lighting voltage monit. 1/2
• active
• not active
Voltage monitoring for license plate lighting. Might cause flickering of LED lights. (codable in LMA)
License plate lighting voltage monit. 2/2
• active
• not active
Deactivate with ‘License plate lighting voltage monit. 1/2’ to disable flickering of LED lights. (codable in LMA)
Rear fog lights voltage monit. 1/2
• active
• not active
Voltage monitoring for rear fog lights. Might cause flickering of LED lights. (codable in LMA)
Rear fog lights voltage monit. 2/2
• active
• not active
Deactivate with ‘Rear fog lights voltage monit. 1/2’ to disable flickering of LED lights. (codable in LMA)
Rear fog light left voltage monit. 1/2
• active
• not active
Voltage monitoring for rear left fog light. Might cause flickering of LED lights. (codable in LMA)
Rear fog light left voltage monit. 2/2
• active
• not active
Deactivate with ‘Rear fog light left voltage monit. 1/2’ to disable flickering of LED lights. (codable in LMA)
Rear fog light right voltage monit. 1/2
• active
• not active
Voltage monitoring for rear right fog light. Might cause flickering of LED lights. (codable in LMA)
Rear fog light right voltage monit. 2/2
• active
• not active
Deactivate with ‘Rear fog light right voltage monit. 1/2’ to disable flickering of LED lights. (codable in LMA)
◆Wranings（警告）
Lights-on warning
• active
• not active
A warning is shown, when the driver’s door is opened while the lights are still on. (codable in LMA)
Angel Eyes/standing lights warning
• active
• not active
Warning for malfunction of angel eyes and the front standing lights in the on board computer. (codable in LMA)
Daytime running lights warning
• active
• not active
Warning for malfunction of daytime running lights and angel eyes in the on board computer. (codable in LMA)
Sidemarker warning
• active
• not active
Warning for malfunction of sidemarker in the on board computer. (codable in LMA)
Turn signals front warning
• active
• not active
Warning for malfunction of front turn signals in the on board computer. (codable in LMA)
Fog lights front warning
• active
• not active
Warning for malfunction of front fog lights in the on board computer. (codable in LMA)
High beams warning
• active
• not active
Warning for malfunction of high beams in the on board computer. (codable in LMA)
Low beams warning
• active
• not active
Warning for malfunction of low beams in the on board computer. (codable in LMA)
Turn signals rear warning
• active
• not active
Warning for malfunction of rear turn signals in the on board computer. (codable in LMA)
Outer brake lights warning
• active
• not active
Warning for malfunction of outer braking lights in the on board computer. (codable in LMA)
Third brake light warning
• active
• not active
Warning for malfunction of third brake light in the on board computer. (codable in LMA)
Tail lights warning
• active
• not active
Warning for malfunction of tail lights in the on board computer. (codable in LMA)
Reversing lights warning
• active
• not active
Warning for malfunction of reversing lights in the on board computer. (codable in LMA)
License plate light warning
• active
• not active
Warning for malfunction of license plate lights in the on board computer. (codable in LMA)
Rear fog light left warning
• active
• not active
Warning for malfunction of rear left fog light in the on board computer. (codable in LMA)
Rear fog light right warning
• active
• not active
Warning for malfunction of rear right fog light in the on board computer. (codable in LMA)
Eyebrow lights warning
• active
• not active
Warning for malfunction of eyebrow lights in the on board computer. (codable in LMA)
◆Welcome Light（ウェルカムライト）
Welcome lights
• active
• not active
Welcome lights are turned on, when vehicle is unlocked. In order for the welcome light to work, the light switch in the car has to be set to ‘Auto’. In some cases, this option also needs to be enabled in the iDrive. In order to customize which lights should be turned on, please use the following options. (codable in LMA)
Welcome lights Key 1
• active
• not active
Separate setting for ‘Welcome lights’ for key 1. (codable in LMA)
Welcome lights Key 2
• active
• not active
Separate setting for ‘Welcome lights’ for key 2. (codable in LMA)
Welcome lights Key 3
• active
• not active
Separate setting for ‘Welcome lights’ for key 3. (codable in LMA)
Welcome lights Key 4
• active
• not active
Separate setting for ‘Welcome lights’ for key 4. (codable in LMA)
Welcome lights duration
• off
• 5s
• 10s
• 20s
• 40s
• 90s
• 150s
• 240s
Duration of the welcome lights in seconds. (codable in LMA)
Welcome lights – low beams
• not active
• turn on softly
• turn on hard
Low beams are turned on with welcome lights. (codable in LMA)
Welcome lights – braking lights
• not active
• turn on softly
• turn on hard
Braking lights are turned on with welcome lights. (codable in LMA)
Welcome lights – turn signals front
• not active
• turn on softly
• turn on hard
Turn signals front are turned on with welcome lights. To activate this function you may need to additionally code ‘Sidemarker (US) brightness’ to ‘very low’ or higher. (codable in LMA)
Welcome lights – turn signals rear
• not active
• turn on softly
• turn on hard
Turn signals rear are turned on with welcome lights. To activate this function you may need to additionally code ‘Sidemarker (US) brightness’ to ‘very low’ or higher. (codable in LMA)
Welcome lights – high beams
• not active
• turn on softly
• turn on hard
High beams are turned on with welcome lights. (codable in LMA)
Welcome lights – number plate lighting
• not active
• turn on softly
• turn on hard
Number plate lights are turned on with welcome lights. (codable in LMA)
Welcome lights – front fog lights
• not active
• turn on softly
• turn on hard
Front fog lights are turned on with welcome lights. (codable in LMA)
Welcome lights – rear fog lights
• not active
• turn on softly
• turn on hard
Rear fog lights are turned on with welcome lights. (codable in LMA)
Welcome lights – corner LEDs
• not active
• turn on softly
• turn on hard
Corner LEDs are turned on with welcome lights. Due to the way LEDs work, it is not possible to softly turn them on. (codable in LMA)
Welcome lights – standing lights front
• not active
• turn on softly
• turn on hard
Standing lights front are turned on with welcome lights. (codable in LMA)
Welcome lights – standing lights rear
• not active
• turn on softly
• turn on hard
Standing lights rear are turned on with welcome lights. (codable in LMA)
Welcome lights – eyebrow lights
• not active
• turn on softly
• turn on hard
Eyebrow lights are turned on with welcome lights. (codable in LMA)
