Lancer X for Russia has not this autolevel. I previously installed headlamps from EVO X and needs in autolevel and headlamp washer. This is mandatory requirements in Russia for xenon ligtht.
I bought a set of sensors (from EVO X and Delica D:5). Installation is not too hard, but too long.
The first i installed sensors. Remove the wheels and mount its.
Buy the way, the new rear arms has not hole for sensor. Need to make it.
But front sensor (from evo x) has reinforced screw and i've increase the hole for it as well.
It adds an extra challenge to mount the front wires. Here it is, in white housing.
Installing the rear sensor is simple.
Mount the wires and connect it to the ecu.
Then activate autolevel in etacs
And rejoice in the picture at the dash panel.
Done!
ブログ一覧 |
Upgrade | クルマ
Posted at
2015/11/05 05:49:13