zackCAのブログ一覧

My entire suspension has been replaced with adjustable arms, and all of the bushings have been changed to either solid aluminum or spherical bearings ...
続きを読む

My father purchased this motorcycle brand new in 1990 and rode it a lot. Unfortunately he injured his back a few years ago, and wasn't able to ride o ...
続きを読む

Today I worked on removing unused wiring. I decided to move the fuse panel that is located by the driver's feet to the center of the car. It is very ...
続きを読む

Today I finally concentrated on cleaning up the wiring. I removed all of the wiring for the heater/ac and radio so far, but since I must follow every ...
続きを読む

This weekend I removed the rear window so I could weld some of the x-brace that I could not access. Now that the rear window is removed, I will use i ...
続きを読む

My G35 is completely a track car now and has a full 6 point roll cage welded in it. There was 2 areas though that I have wanted to modify, and finall ...
続きを読む

The 6MT is installed and fully functional, but I had to make a larger hole for the shifter since the 6MT is a little longer. The hole was a very roug ...
続きを読む

Today I finished all rear suspension work. I too a picture to show the 4 different bushings that were replaced on each rear knuckle. Bushings 1-3 are ...
続きを読む

Today I completely finished the driver side of the rear suspension and also removed the passenger side rear knuckle to finish tomorrow. I changed the ...
続きを読む

Today I started to work on the rear knuckles. I purchased SPL monoball spherical bushings to replace all 4 bushings on the rear knuckles. They are su ...
続きを読む