zackCAのブログ一覧

Here are the new seat backs! The leather matches very well, the only thing that is different is that it is too new compared to the rest of the seat :)


Today I installed the KPTechnologies mirror tilt module. You have to remove the panel under the dash to access the mirror plug and wiring harness. I get very nervous taking apart the G35!


There are 8 wires total that need to be installed. I carefully soldered and put heat shrink tubing over all connections. Here is a picture of on of the connections-



The mirror module works great! Tomorrow I will post a video of it working - I am very happy with it!

I also worked on the S13 a little today, and took pictures of some of the parts I installed yesterday. Here is a picture of the painted valve cover and coilpack cover, and the Blitz upper radiator hose.


I also replaced the high pressure power steering line with the Earl's fittings line. The line fits much better into the engine bay and looks a lot cleaner as well. My original line was broken and had a small leak.


Finally, I installed the Kazama under protector - very easy to install! I think it will help protect the oil pan because the car is very low :)


I also installed the boost and water temp gauges, but I still need to make a gauge holder. I placed the gauges in the center air conditioner area. I have no air conditioning since the car is for racing only, so I removed the center air conditioning vents and placed the gauges there. I think this is a common modification. I will take pictures when it is finished next weekend.