内容を理解していないが、 通常↓表示されるものが、定義ファイルに下記を書き込むとI've been sniffing around the subroutine that sets the ignition retard limit, and it appears that in the newer ROMs, there are two ignition retard limit tables that are used for two different operating conditions. Not sure yet on what conditions these are, but here are the two tables for the 8859XX15 and the 9653XX06. They may both need to be set more neg for ignition to retard further under all conditions. Note that the max possible neg value is about -28 deg. Should be easy for people running newer JDM, EDM, and ADM ROMs to find the additional table by comparing the offset between the two addresses. 88570008-88570014, 88580013-88580015, 88840016, 88900006 ↓書き込むないよう。Ignition Retard Limitが↓表示されるようになる。以下の数値が入ってる。Ignition Retard Limit #1 -7.5546875Ignition Retard Limit #2 -10.3671875弄るとどうなる？
